You can unregister a Blink camera without logging in by factory resetting the device itself

If you no longer have access to your Blink account—or you don't want to use it—you can still remove the camera from the system by performing a factory reset on the device. This erases all settings and disconnects it from any account. The reset button is a small recessed button on the back or bottom of the camera; press and hold it for 10 to 15 seconds until the LED light blinks amber, then red. Once the light turns red, the camera has been reset and will no longer be registered to any account.

If you do have access to your account but want to remove the camera, you can unregister it through the Blink app or website without resetting the device. This is cleaner if you plan to sell or give away the camera in working condition, because the new owner can set it up fresh without needing a factory reset.

Key Takeaways

  • A factory reset using the recessed button on the camera itself removes it from any account without needing login credentials.
  • If you have account access, you can unregister the camera through the Blink app by selecting the device and choosing the remove or delete option.
  • Factory reset takes 10 to 15 seconds of holding the button and is complete once the LED turns red.
  • After unregistering, the camera will not connect to any network or account until it is set up again from scratch.

Factory reset when you cannot access your account

Locate the small recessed reset button on your Blink camera. On most models, it is on the back panel or the bottom of the device. You will need a paperclip, pen tip, or similar tool to press it, because the button sits inside a small hole to prevent accidental presses.

Press and hold the button for 10 to 15 seconds without releasing. Watch the LED light on the front of the camera. It will blink amber while you are holding the button. When you reach 10 to 15 seconds, release the button and watch for the light to turn red. A red light means the reset is complete and the camera has been wiped of all settings and account information.

Once the reset is done, the camera will not connect to any Wi-Fi network or account. If someone else receives the camera, they can set it up as a new device in their own Blink account. If you plan to keep the camera but use it with a different account, you will need to set it up again from the beginning.

Unregistering through the Blink app if you have account access

Open the Blink app on your phone or tablet and log in with your account credentials. Navigate to the home screen and find the camera you want to remove from your list of devices.

Tap on the camera name or icon to open its settings. Look for an option labeled "Remove Device," "Delete," "Unregister," or similar wording—the exact label varies by app version. Tap that option and confirm when the app asks you to verify the removal.

The camera will be removed from your account immediately. It will disconnect from your Wi-Fi and will no longer send alerts or record to your account. The device itself is not damaged; it simply needs to be set up again if you want to use it in the future.

Unregistering through the Blink website

If you prefer to use a computer, log into your Blink account at the official Blink website. Go to your devices or systems page, where all your registered cameras are listed.

Find the camera you want to remove and click on it to open its details. Look for a settings icon, gear icon, or menu button. Select the option to remove or delete the device. Confirm the removal when prompted.

The camera will be unregistered from your account the same way it would be through the app. You can use either method; the result is identical.

What happens after you unregister

Once a camera is unregistered—whether by factory reset or through your account—it stops communicating with Blink's servers. It will not send you notifications, record video, or respond to commands. If the camera is powered on, it will attempt to connect to your Wi-Fi network, but it will not succeed because it has no account credentials stored.

If you want to use the camera again later, you will need to set it up as a new device. This means opening the Blink app, selecting "Add Device," scanning the QR code on the camera or its box, connecting it to your Wi-Fi, and creating or selecting a system to add it to. The process takes a few minutes.

Selling or giving away an unregistered camera

An unregistered Blink camera is safe to sell or give to someone else. The new owner will see no trace of your account or any previous setup. They can add it to their own Blink account as if it were brand new out of the box.

If you unregistered through the app, the camera may still have your Wi-Fi password stored in its memory. A factory reset clears this, so if you want to be thorough about privacy, perform a factory reset before handing the camera to someone else. This ensures no network information from your home remains on the device.

Troubleshooting a stuck or unresponsive camera

If the reset button does not seem to work, or the LED does not respond, the camera may have a dead battery. Charge the camera fully using its USB cable or replace the batteries if it uses AA or AAA cells. Then try the reset again.

If the camera is plugged into power and still does not reset, try holding the button for up to 30 seconds instead of 10 to 15. Some models require a longer press. If the LED never turns red, the device may be faulty, but you can still unregister it through your account if you have access.

Frequently Asked Questions

Will unregistering the camera delete my video recordings?

Yes. Any video stored in your Blink account associated with that camera will be deleted when you unregister it. If you want to keep recordings, download them to your computer before unregistering. Once the camera is removed, you cannot access those videos through your account anymore.

Can I unregister a camera if I forgot my password?

Yes. Use the factory reset method by pressing the recessed button on the camera itself. You do not need your password or account access to perform a factory reset. If you want to regain access to your account, use the "Forgot Password" option on the Blink login page to reset your credentials.

Does factory reset remove the camera from my account automatically?

A factory reset removes all data from the camera itself, but it does not notify your account that the camera is gone. The camera will still appear in your app as offline or unresponsive. You can remove it from your account manually through the app to clean up your device list, but this is optional if you never plan to use that account again.

What if I unregister the camera by mistake?

You can add it back to your account immediately by opening the Blink app, selecting "Add Device," and following the setup steps. As long as you have not factory reset the device, it will reconnect to your Wi-Fi and account within a few minutes. If you did factory reset it, you will still be able to add it back; the process is the same.

Can someone else see my account if I give them an unregistered camera?

No. An unregistered camera contains no account information, login credentials, or personal data. The new owner will set it up as a completely new device in their own account. They will not see any of your information, recordings, or settings. For maximum privacy, perform a factory reset before giving the camera away.